The M12 connector follows IEC 61076-2-104

Features of M12 90 ° bend pin solder PCB connector:

Product type: M12 circular connector

Coding type: a type, B type, D type, X type, T type, s type, K type, L type

Wiring mode: welding, straight pin welding plate, bending pin welding plate

Contact pin / hole number: 2 cores, 3 cores, 4 cores, 5 cores, 6 cores, 7 cores, 8 cores, 9 cores, 10 cores, 11 cores, 12 cores, 13 cores, 14 cores, 15 cores, 16 cores, 17 cores

Connection mode: M12 thread clasp type

Installation method: front panel installation, rear panel installation, line-to-line plastic assembly type, line-to-line metal assembly type

Material and technical mode of PCB connector for M12 90 ° bend pin welding:

Shell material: nickel plated brass, nickel plated iron, aluminum.

Insulator material: TPE / GF / PA66 / PPS

Contact material: Brass gold plating, brass nickel plating

Wiring mode welding

500 times of inserting and inserting

Temperature range - 25 ℃ to + 85 ℃

Cable diameter ≤ 3.3-5.0mm

Technical parameters of M12 90 ° bend pin solder PCB connector:

The number of stitches was 34 5 8 12 17

Rated voltage 250V 250V 60V 30V 30V 30V 30V

Rated current 4A 4A 2A 1.5A 1.5A 1.5A

Contact resistance < 5m Ω

Insulation resistance > 100m Ω

Protection grade IP67 or IP68

Mechanical life 500 cycles

The diameter of male needle is 1.0 ± 0.03 0.8 ± 0.03 0.6 ± 0.03